Selfnet Blog

Nov 13, 2018

Connected In der Au to the dormitory network

Last Saturday (2018-11-10) we've connected the dormitory In der Au in Stuttgart-Untertürkheim to our network.

The new dormitory is connected with 10 GBit/s to our core network. We are currently investigating if the network outlets in the individual rooms are working properly. In some cases the outlets may be defective due to the usual wear and tear and are only capable of 10% (100 MBit/s of 1000 MBit/s) of the possible speed. Due to the previous overall uplink connection this was probably unnoticed.

If you live in the In der Au dormitory and notice that your device only has a link speed of 100 MBit/s (also called FastEthernet) instead of 1000 MBit/s (1 GBit/s or GigabitEthernet) please send an email to support@selfnet.de so we can have a look at the individual outlet in your room.

Switches in house A connecting the fiberoptic uplink from the outside the the rooms in house A and to the other switches in house B and C. Switch rack in house C being prepared for our switches. Switch rack in house C with our switches but unpatched. Switch rack in house C with switches and all patch cables neatly arranged for clarity when one has to debug a problem. Another photo of one of the switches in house A showing the fiberoptic uplink cable (bidi SFP+) and a DAC cable connecting it to the other switch Photo of the 2 switches in the rack in house B properly patched and operational.

May 03, 2018

Connected Anna-Herrigel-Haus to the dormitory network

Last Friday (2018-04-27) we connected the Anna-Herrigel-Haus to the dormitory network.

As with all newly connected dormitories we:

  • Checked the RJ45 LAN network outlets in all rooms using a measurement device.
  • Mounted the access switch into the rack which distributes the network connection from our fibre network.
  • Connected the optical fibers using optical transceivers. Most of the transceivers (SFP+) we buy are sold by Flexoptix. In this case we used 10G SFP+ BIDI LR LC, 10km, 1330 nm, singlemode transceivers.
  • Connected all patchpanel copper RJ45 LAN connectors (which on the other end lead to the network outlet in a room) to the switch.
  • Made sure everything works.

Switchroom with laptop connected via serial console to access switch to configure fiberoptic uplink. // Switchraum mit Laptop das über eine serielle Konsole mit dem Switch verbunden ist um den Glasfaser-Uplink einzurichten. Starting to patch the the copper RJ45 patchcables neatly between patchpanel and switch. // Während des Patchens der RJ45 Kupferkabel zwischen Patchpanel und Switch. Photo from outside of building. // Foto des Hauses vom Garten aus. Close up of operational switch showing neatly connected cables. // Nahansicht der Verkabelung. Completely patched and operational Switch fully patched with all cables. // Komplett angeschlossener Switch. plaque in the entrance area (translation from German): Until 1943 this was the "Jakobiheim", named after Margarethe Jakobi 1910 given to the female teachers of Canstatt, destroyed by bombs in 1943, the house could be rebuilt thanks to Anna Herrigel in 1953/54. // Gedenktafel im Eingangsbereich: Bis 1943 stand hier das "Jakobiheim", von Margarethe Jakobi 1910 den Cannstatter Lehrerinnen gestiftet, 1943 durch Fliegerbomben zerstört, konnte das Haus 1953/54 dank der tatkräftigen Bemühungen von Anna Herrigel wieder aufgebaut werden. Speedtest in progress showing a Download speed of 983.88 Mbit/s. // Speedtest im Gange der im Download 983,88 Mbit/s anzeigt.

Nov 08, 2017

Erweiterung des Selfnet-Netzwerkes in der Stuttgarter City (Teil II)

Im Laufe des Wochenendes 18.11./19.11.2017 werden die Wohnheime:

  • Kernerstr. 2
  • Landhausstr. 14
  • Neckarstr. 132
  • Rieckestr. 17
  • Neckarstr. 172 (Boardinghaus)

an unser Wohnheimnetzwerk angeschlossen.

In Vorbereitung dieser Aktion haben wir bereits den Umbau geplant, die notwendige Hardware angeschafft (vor allem Switche) und Glasfasern zu den Gebäuden legen lassen.

An genanntem Wochenende werden wir die neue Hardware in den Gebäuden installieren, die bestehende LAN-Verkabelung innerhalb der Gebäude mit unserer Hardware verbinden und über die Glasfaserkabel dann an unser Netzwerk anbinden. Wenn du Lust hast, dabei mitzuhelfen, kannst du gerne auf uns zukommen!

Wir werden Euch natürlich über den Status der Umbauaktion per twitter.com/Selfnet_eV auf dem Laufenden halten.

Nachtrag 2017-11-21: Leider konnte die Rieckestr. 17 an diesem Wochenende nicht angebunden werden, da es Verzögerungen bei der Verlegung der Glasfaser gegeben hat. Nachtrag 2017-11-30: Die Rieckestr. 17 wurde heute heute erfolgreich ans Wohnheimnetzwerk angeschlossen.

← Previous Next → Page 2 of 3